Letter of Intent - 10 Best Practices for Buyers & Sellers
At our firm, the members of our business sales & transaction team have worked on a wide range of M&A engagements over the past fourteen (14). In this article, we address some key issues buyers and sellers encounter during the business acquisition process and discuss how a well prepared Letter of Intent (LOI) helps both buyers and sellers.
Further Reading:
First, the LOI is almost always non-binding and a Buyer gives themselves a lot of room to walk away from a deal during due diligence. However, these agreements are an important document that spells out many key terms. Done properly, these documents establish a framework for the M& A transaction. The letters are not long, sometimes just a few pages are all that is necessary for deals we sell and they are used prior to the attorneys drafting a purchase agreement.
An LOI helps the parties to work through the key issues early on in the negotiation process and identify any deal breakers before unnecessary expenses have been incurred. If an agreement is reached on key terms, the LOI can establish a moral (if not legal) obligation to attempt to negotiate a purchase agreement in good faith.
Is the Letter of Intent - Binding or Non-binding?
The letter of intent should clearly state that it is non-binding, except for sections that are expressly designated as binding. Many LOI's create confusion because they are stated to be letters of intent only, but then are written as if they are binding agreements. Commonly only a few of the sections are designated as binding, such as exclusivity, confidentiality and obligation to negotiate.
Settle key deal terms early in the LOI
It is usually in the interest of the seller to settle key deal terms in the LOI, particularly price. By contrast, the buyer may wish to leave wiggle room in the LOI to retain the flexibility to negotiate key terms based on its due diligence findings (although care should be taken not to negotiate an LOI that is so vague that the deal falls apart later on when the parties realize they didn’t agree on the basic terms). The parties may find a middle ground by agreeing to key terms based on certain assumptions being confirmed by the due diligence process.
Note: It’s important to balance the benefit of settling key terms in the LOI against the risk of early burnout from the over-negotiation of the LOI. We often see even sophisticated buyers attempting to fully settle net working capital requirements, WIP, inventory, and reps, and warranties issues on deals under $2mm. Simplicity is almost always better when drafting a letter of intent and leads to better outcomes.
The letter of intent letter should set out at a minimum, the following elements:
How much cash will be paid at closing to the Business Owner? What assets are being acquired? What assets are not included in the sale? Asset sale or stock sale?
What are the financing terms and who will be financing the transaction? Will there be a Seller note?
Will there be an exclusivity period during due diligence - for how long? Will a refundable deposit be paid?
Are there any special terms for the buyer as far as Reps & Warranties are concerned?
Real Estate - Is buyer leasing or buying real estate? Define terms buying or leasing the property.
Non-Compete Agreements - Any special terms and conditions? Define these desired terms.
Training & Transition - Define this agreement as clearly as possible. Duration, hourly rate…
Due Diligence - Anything specific necessary such as licenses or contracts from customers needing to be addressed? Define these issues as best as possible.
Establish dates or milestones for Buyers to agree to adhere to during the due diligence phase of the transaction. Buyers should multi-task or deals can drag on for months and incur significantly more legal costs than necessary for each party.
Confidentiality - Ensure both parties agree to keep confidentiality during the due diligence process.
Details of Each of the Above Ten Elements:
Addressing Price in the Letter of Intent
The seller will likely prefer that the LOI set a fixed price, however, the buyer may be more comfortable with a price range or formula, leaving wiggle room to set the final price after it conducts its due diligence. Our preference is to establish price and the structure of the deal right up front. How did you calculate the valuation and explain the basis of your offer. Example, the offer is 3x the average of the past 3 years of Seller Discretionary Earnings (SDE).
Assets - Allocations
The LOI should set out the major assets being acquired and liabilities being assumed by the buyer, as well as any material assets that are to be excluded from the sale. In a share sale, any major assets or liabilities of the target that will be removed from the target before closing should be specified. The parties may also choose to broadly determine how the purchase price will be allocated between asset classes, as this has important tax implications for both sides. The buyer will prefer to allocate as much as possible to the depreciable assets. The seller will prefer to allocate an amount equal to the cost base of the depreciable assets (so as to avoid a recapture) and the remainder to goodwill (taxable).
Financing - Contingent or Not?
If the deal is subject to the buyer obtaining SBA Financing, the Seller will want to know the following;
Name and contact person at the bank
Proof the buyer has been pre-qualified
The average length of time to close (typically 60-75 days),
What is the deal structure? How much is the Buyer putting down as their injection of equity-the range can be 10-25% of the purchase price,
Are there any Seller note issues that the Seller needs to be aware of prior to agreeing to the letter of intent, for example, is the bank requiring a standby note for up to two years, any issues with possible lease terms (If Seller owns the property).
Note: Buyers should require a written term or commitment letter & a breakdown of fees for your transaction (A Real-World Example of an SBA Loan from 2019)
After bank approval a closing checklist will be provided to the buyer and the seller or broker will want to check for any conditions that might affect final approval.
Exclusivity Period
The buyer will often require the seller to commit to deal only with the buyer for a certain period of time, so it doesn’t waste its time and money carrying out due diligence and negotiating a purchase agreement while the seller is shopping the deal to other interested parties. The exclusivity period is generally somewhere between 45 and 120 days.
The seller should not agree to an exclusivity period unless it has a reasonable degree of confidence that the buyer is likely to go through with the transaction. Exclusivity not only takes the seller’s business off the market for a significant period of time but, if the negotiations with the buyer fail, means the seller will likely have to go back to the same pool of potential parties to find an alternate buyer – parties who may be less enthusiastic about the deal knowing that the seller’s negotiations with its preferred buyer failed.
Confidentiality
Whether set out in a separate non-disclosure agreement or in the LOI, the parties (and the seller in particular) should ensure that confidential information disclosed as part of the due diligence process is protected. The confidential information disclosed to a party should only be usable for the purpose of assessing and completing the transaction.
Representations and Warranties
An exhaustive list of representations and warranties is generally not set out in the LOI. But, the buyer should include any representations it considers particularly important or that the seller may not anticipate, and provide that the representations set out in the LOI are not exhaustive.
The parties may wish to set out the often controversial terms regarding post-closing claims for breaches of representations in the LOI, such as the survival periods for representations, as well as indemnification caps, thresholds and carve-outs.
Closing Conditions
An exhaustive list of closing conditions is not necessary, but the buyer should set out the key conditions that will need to be met in order for it to close the deal (eg. key government or third party consents, non-competition agreements from principals, financing, etc.).
Termination Fee or Deposit
A strong buyer may seek a breakup fee to cover its expenses if the seller decides not to proceed with the transaction after the buyer has completed its due diligence. A Seller may insist on a deposit either at the execution of the LOI or upon the signing of the purchase agreement.
Post-Closing
Congratulations on reaching the final step of closing the deal. Now the fun begins as you sign the final documents and begin preparations to meet with the employees, vendors, customers and assume control.
If you have any questions regarding the sale of your business contact Jim Peddle at 312-525-9622 or by email at president@playbookadvisory.com.
Checklist for Buyers - Contact us for a Google File
General Information
Identify both parties (buyer and seller) including full legal names and contact information.
Define the scope of the business transaction clearly.
Set a clear date and state the location for the document.
Terms of the Agreement
Price and Payment Terms:
Agree on the purchase price or a price range.
Specify the amount of cash to be paid at closing.
Detail any deferred payment structures or earn-outs.
Assets Included and Excluded:
List major assets to be acquired.
Identify significant liabilities assumed by the buyer.
Clarify any assets that are excluded from the sale.
Financing:
Outline financing terms, if any.
Confirm if seller financing (seller note) is part of the deal.
Note if buyer needs to secure financing and the contingencies related to it.
Exclusivity Period:
Define the length of the exclusivity period.
Clarify terms and conditions related to exclusivity.
Additional Terms
Reps and Warranties:
Decide if any are to be included in the LOI.
Specify any that are critical and need early agreement.
Real Estate:
Specify if real estate is part of the transaction.
Detail lease or purchase terms.
Non-Compete Agreement:
Outline any non-compete clauses and durations.
Training and Transition:
Detail any training and transition support from the seller.
Specify duration and any associated costs.
Due Diligence:
List specific items required for due diligence.
Set milestones and deadlines for due diligence completion.
Legal and Confidentiality
Confidentiality Agreement:
Ensure there is an agreement on confidentiality terms.
Binding and Non-Binding Sections:
Clearly state which parts of the LOI are binding.
Termination Clauses:
Define the conditions under which either party can terminate the LOI.
Closing Conditions:
List conditions that must be met for the transaction to close.
Final Steps
Review and Adjustments:
Review the LOI with legal counsel.
Make any necessary revisions based on legal advice and negotiations.
Signatures:
Obtain signatures from authorized representatives of both parties.
Copy and Distribution:
Distribute copies of the signed LOI to all relevant parties.
This checklist serves to ensure that all important elements are considered in the LOI, reducing the likelihood of misunderstandings or legal issues as the deal progresses.
If you have any questions regarding the sale of your business contact Jim Peddle at 312-525-9622 or by email at president@playbookadvisory.com.
Author, Jim Peddle, Business Broker, All rights are reserved
Other Reading of Interest for Business Buyers: